Netgear Extender Ethernet Port Not Working?

0
130

Netgear range extenders are one of the best WiFi devices that help in boosting up the existing WiFi range up to 30 percent. After performing Netgear WiFi extender setup, when you get connected to Netgear_ext, you will get extended range of the internet all over the house. Apart from this, Netgear range extender comes with an Ethernet port that allows its users to connect the wired and wireless devices. However, 4 out of 5 users across the globe complain that their Netgear WiFi range extender’s Ethernet port is not working well. 

If you are also sailing on the same boat, then we have a rescue plan for you. Here, in this tutorial, you will get one of the best fixes that will surely help you to rectify “Netgear extender Ethernet port not working” issue on the fly.

Let’s dive in!

Netgear Extender Ethernet Port Not Working

The Fixes

Apply the instructions highlighted underneath to fix the “Netgear extender Ethernet port not working” issue:

Power Cycle Your Netgear Extender

This is one of the most important fixes to consider. “Power cycle or restart” your Netgear extender!

Follow the steps highlighted below to power cycle or restart the extender:

Step 1: First of all, you have to stop accessing Netgear_ext. In simple words, get disconnected to the extender’s SSID.

Step 2: Unplug your WiFi range extender and wait for a few minutes.

Step 3: Power on your Netgear device and connect it to your main router using an Ethernet cable.

Once you are done, access the extender’s WiFi again i.e. Netgear_ext and access mywifiext setup page to see if the “Netgear extender Ethernet port not working” issue is fixed or not.

Oh! Your extender’s Ethernet port is still giving you trouble? No worries! Head towards the next troubleshooting tip.

Check the LEDs on Your Extender

Please have a look at the LEDs on your Netgear extender. All of them must be stable! If you find that the LEDs on it are blinking for longer than expected, press the power button and wait till they get stable.

Note: Here, “it” we are referring to the Netgear extender.

Replace the Ethernet Cable

Maybe the Ethernet cable you are using is the culprit. So, stop cursing your Netgear extender’s Ethernet port and replace your Ethernet cable right away.

Note: Only replace the Ethernet cable if it is damaged.

Moreover, please check the Ethernet connection. Ensure that it is firmly and securely made. Moreover, both the ends of the Ethernet cable must be connected properly to the correct ports. If you are getting the same error, try inserting the Ethernet cable on another port of the extender.

Bonus tip: Enable the Ethernet option. Yes, you read it right! You will surely get “Netgear extender Ethernet port not working” issue if you have disabled the “Ethernet” option. So, to cope up with the issue in a jiffy please enable the Ethernet option.

How to Enable Ethernet Option?

Step 1: Turn on a laptop or desktop.

Step 2: Click on the Search icon.

Step 3: Enter CMD.

Step 4: Type “devmgmt.msc” without quotes.

Step 5: Hit the Enter key.

Step 6: Device Manager screen will display.

Step 7: Locate and double-click on Network adapters.

Step 8: The Ethernet option might be disabled. Please enable it to continue further.

Once the Ethernet option gets enabled, you will have no issue while accessing the device. After enabling the option, please verify whether the Ethernet port has started working or not by accessing the Settings page of your Netgear extender using 192.168.1.250 IP.

Here’s to hope that the Netgear extender’s settings page has been displayed successfully? Yes? Fab! The Ethernet port of your Netgear extender is not working.

To Wrap Up

Getting “Netgear extender Ethernet port not working” issue is not a big thing to worry about. It usually happens! Applying the tips in this post is the solution to such kind of small issues. One more thing we would like to tell you. Whenever, you face any kind of issue with your Netgear extender, before applying any advance troubleshooting tips, just restart it once. Restarting or power cycling the Netgear extender is a remedy to all big and small issue related to it, be it:

  • Can’t update extender’s firmware
  • Extender not working after firmware update
  • Unable to setup Netgear extender
  • Getting amber, no, or red color LED on Netgear extender
  • Can’t access Netgear_ext
  • Extender connected but no internet
  • Or router, laptop, computer, iPhone, iPad, etc. can’t connect to the Netgear extender.

LEAVE A REPLY

Please enter your comment!
Please enter your name here