If the LED on the Netgear router currently in use is blinking red, it is something to worry about. But, the good news here is that by following a few troubleshooting hacks, resolving this issue is possible. Thus, follow the fixes below. Trust us, they won’t disappoint you in changing the rectifying the issue at hand.
Troubleshoot Netgear Router Red Light Issue
- Perform Netgear Firmware Upgrade
Before you divert your attention to any other troubleshooting hack, it is recommended that you upgrade the firmware of your Netgear router via routerlogin.net. This can be done if you carefully walk through the following instructions:
- Open your most used browser on your laptop.
- In the URL field, type routerlogin.net.
- Proceed further by pressing the Enter key.
- Reached the Netgear router login page? Enter the admin details then.
- Hit Log In.
- You will reach the Netgear Genie dashboard.
- The settings page will appear.
- Click Administration and then the Firmware Update button.
With that, you will be able to upgrade the firmware of your Netgear WiFi router with ease.
- Check the Power Supply
Although performing Netgear router firmware upgrade might put an end to the Netgear router red light issue, in case, it does not, check the power socket into which you have plugged your wireless device.
If some damage has been done to the wall socket, then take our advice and plug your Netgear Nighthawk router into a different one. In case you want to skip the hard work, contact an electrician and get the current wall socket repaired.
- Verify the Ethernet Connection
The Ethernet cable that you have put to use to connect your devices should not have any cuts on it. In case, you do find some cuts on it, then why don’t you swap it with a new one?
Want to avoid doing hard work in this case too? Well then, it is recommended that you make use of a wireless source to connect your devices.
- Pull Your WiFi Devices Closer
Another thing that can help you to put an end to the Netgear router red light issue is to reduce the distance between your connected devices. In simple words, pull your router and the existing modem a little closer.
Pay attention to the term ‘a little’ closer here. It other words, do not make the mistake of placing your devices too close. Or else, their signals might collide at any time.
Now, use the routerlogin.net password and username, log in to your device, and see if the Netgear router red light issue persists. If it does, move to the next fix.
- Eliminate WiFi Interference
Another thing that can be done to troubleshoot the Netgear router red light issue is to get rid of WiFi interference. Eliminating WiFi interference is a piece of cake. All you need to do is, change the location of your wireless device.
While doing that, following devices as well as appliances should be at a safe distance from your router:
- Microwave ovens
- Baby monitors
- Treadmills
- Bluetooth speakers
- Televisions
- Mirrors
- Cordless phones
- Refrigerators
- Aluminum studs
- Fish tanks
- Washing machines
Also, ensure that walls and utensils containing water are also away from your WiFi router.
- Reset Your Netgear Router
If none of the troubleshooting hacks mentioned above has helped you to fix the issue that you were experiencing, it is recommended that you reset your Netgear wireless router.
Resetting your device is possible if you follow the steps mentioned below:
- Find the location of the Reset button.
- Once found, press the button.
- For as long as required, wait.
After the process of Netgear router reset has ended, you need to reconfigure your device. That can be done by accessing the default IP address, i.e. 192.168.1.1. If you want, you can also use the Nighthawk app to execute the setup process.
Sum Up
With pride, we are wrapping our guide based on troubleshooting the Netgear router red light issue. Let us hope that the hacks mentioned above in this article helped you put an end to the issue you were experiencing.
If you are acquainted with any other hack through which the same issue can be rectified, take this opportunity and share it with your fellow readers. You can do it via the comment section located below.
